data from 25.02.2022

1. Load Rb in 814 1.6V
2. Load CS in 938 array, rearrange then transfer to 1064
3. Ramp traps to RSC depths:
  814 2.16V (105MHz 150mV CH0, 100MHz 150mV CH1), 2.5mW => 25kHz trap freq
  1064 1.7V = 30mW, 17kHz trap freq
4. Initial OP 5ms
5. Ramp NS shim to 5V (makes more sensitive to angle and means that we don't draw too much current for PS)
  a. Note -- this might put some of the OP beams a few MHz off resonance from different Zeeman shift, but it's only affecting the scattering rate during depump
  b. Ramp EW/UD shim to new value
  c. depump pulse 2->2 / 4->4 for 2ms
6. Ramp back for pushout

ROI0: Cs
ROI1: Rb
Measure0: varying EW shim
Measure1: varying UD shim
