###########################################################
Data for "Rough capillary rise" by Panter et. al., 2023
###########################################################

Contained in this directory:

fig_2_b_sim.txt: Simulation data for the rise heights vs. plate separation in Fig. 2b for system SQ1. Columns are:
	d[mm] - [units=millimetres] - Distance between the tops of the pillars between the plates
	delta[mm] - [units=millimetres] - Average roughness depth (a constant property of the texture)
	C[mm] - [units=millimetres] - Capillary rise height
	H[mm] - [units=millimetres] - Hemiwicking rise height
	M[mm] - [units=millimetres] - Meniscus rise height rise height
	(Please note the total rise height T=C+H+M)
	
	
fig_2_b_sim.txt: Experimental data for the rise heights vs. plate separation in Fig. 2b for system SQ1. Columns are:
	d[mm] - [units=millimetres] - Distance between the tops of the pillars between the plates
	delta[mm] - [units=millimetres] - Average roughness depth (a constant property of the texture)
	C[mm] - [units=millimetres] - Capillary rise height
	H[mm] - [units=millimetres] - Hemiwicking rise height
	M[mm] - [units=millimetres] - Meniscus rise height rise height
	(Please note the total rise height T=C+H+M)	
	
	
fig_2_d_sim.txt: Simulation data for the rise heights vs. plate separation in Fig. 2d for system CY1. Columns are:
	d[mm] - [units=millimetres] - Distance between the tops of the pillars between the plates
	delta[mm] - [units=millimetres] - Average roughness depth (a constant property of the texture)
	C[mm] - [units=millimetres] - Capillary rise height
	H[mm] - [units=millimetres] - Hemiwicking rise height
	M[mm] - [units=millimetres] - Meniscus rise height rise height
	(Please note the total rise height T=C+H+M)
	
	
fig_2_d_sim.txt: Experimental data for the rise heights vs. plate separation in Fig. 2d for system CY1. Columns are:
	d[mm] - [units=millimetres] - Distance between the tops of the pillars between the plates
	delta[mm] - [units=millimetres] - Average roughness depth (a constant property of the texture)
	C[mm] - [units=millimetres] - Capillary rise height
	H[mm] - [units=millimetres] - Hemiwicking rise height
	M[mm] - [units=millimetres] - Meniscus rise height rise height
	(Please note the total rise height T=C+H+M)
